Boat Lifts

Boat lift installation services in Southwest Florida has specific challenges that other places simply do not; three foot tide changes, hurricanes, tropical organisms that eat away at your pilings, shifting sands, specific permitting requirements, shallow water conditions, the list goes on. Call Stokes Marine to have your boat lift installed correctly the first time.

We recommend boat lifts that are made with aluminum and stainless steel. The lifts we install are made locally in Fort Myers. This allows for custom manufacturing when needed for your boat. No boat is too large or too small. Protect your investment in your boat and call us to have a lift installed today!

Stokes Marine does boat lift installation, the right way. Our team is licensed and insured. We install over 50 boat lifts a year in Florida. We custom set the bunks and guide poles for every new lift we install when the boat arrives. We will have our Service Manager on site for your assistance the first time you pick up your boat to ensure the boat is lifted and situated properly. We also offer a maintenance program to ensure your investment is well maintained and going to operate properly for years to come.

New Lift

Pile Spacing

4 Post boat lifts.

chart

Lift
Capacity
A B C Recommended
Min. Pile Size
4500 132" 120" 178" 8" DIA.
7000 144" 144" 204" 8" DIA.
10000 144" 150" 208" 8" DIA.
13000 144" 150" 208" 8" DIA.
16000 144" 168" 221" 10" DIA.
20000 168" 192" 255" 10" DIA.
27000 192" 192" 271" 10" DIA.

 

Four Post Boat Lift Specification Sheet

Roll over chart to see full-size.

4500 7000 10000 13000 16000 20000 27000 32000 40000 54000
Top Beam Channel Size 4" x 2.00" 5" x 2.25" 6" x 2.50" 7" x 2.75" 7" x 3.50" 8" x 3.75" 9" x 12 7/8" 7" x 3.50" 8" x 3.75" 9" x 4.00"
Top Beam Overall Size 4" x 8 7/8" 5" x 9 3/8" 6" x 9 7/8" 7" x 10 3/8" 7" x 11 7/8" 8" x 12 3/8" 9" x 12 7/8" 7" x 11 7/8" 8" x 12 3/8" 9" x 12 7/8"
Number of Bearings 10 10 10 10 10 10 10 16 16 16
Groved Cable Winder Length 2 3/8" DIA. x 16" Long 2 3/8" DIA. x 16" Long 2 3/8" DIA. x 19" Long 2 3/8" DIA. x 19" Long 2 3/8" DIA. x 19" Long 2 3/8" DIA. x 23" Long 2 3/8" DIA. x 23" Long 2 3/8" DIA. x 19" Long 2 3/8" DIA. x 23" Long 2 3/8" DIA. x 23" Long
Drive Shaft Size 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe 1 15/16" O.D. Galv. Pipe
Chain Size #50 #50 #50 #50 #60 #60 #60 #60 #60 #60
Drive Shaft Sprocket 60 Tooth 60 Tooth 60 Tooth 60 Tooth 50 Tooth 50 Tooth 50 Tooth 50 Tooth 50 Tooth 50 Tooth
Gear Drive Sprocket 11 Tooth 9 Tooth 11 Tooth 9 Tooth 12 Tooth 12 Tooth 10 Tooth 12 Tooth 12 Tooth 10 Tooth
Sealed Oil Bath Gear Reducer 60:1 60:1 60:1 60:1 60:1 60:1 60:1 60:1 60:1 60:1
No. of Motors & Horse Power (2) 3/4 H.P. (2) 3/4 H.P. (2) 3/4 H.P. (2) 3/4 H.P. (2) 1 H.P. (2) 1 H.P. (2) 1 H.P. (4) 1 H.P. (4) 1 H.P. (4) 1 H.P.
Motor Voltage & Amps per 120 V 11.4 Amps
240 V 5.7 Amps
120 V 11.4 Amps
240 V 5.7 Amps
120 V 11.4 Amps
240 V 5.7 Amps
120 V 11.4 Amps
240 V 5.7 Amps
120 V 14 Amps
240 V 7.0 Amps
120 V 14 Amps
240 V 7.0 Amps
120 V 14 Amps
240 V 7.0 Amps
120 V 28 Amps
240 V 14.0 Amps
120 V 28 Amps
240 V 14.0 Amps
120 V 28 Amps
240 V 14.0 Amps
Cables 1/4" DIA. 15 FT
1 Part
5/16" DIA. 15 FT
1 Part
1/4" DIA. 30 FT
2 Part
5/16" DIA. 30 FT
2 Part
5/16" DIA. 30 FT
2 Part
5/16" DIA. 45 FT
3 Part
5/16" DIA. 45 FT
3 Part
5/16" DIA. 40 FT
2 Part
5/16" DIA. 60 FT
3 Part
5/16" DIA. 60 FT
3 Part
Cable Spread 102" 114" 114" 114" 114" 124" 148" 28" 28" 28"
Speed of Lift Inches/ Minute 45 36 23 18 22 16 13 22 16 13
Guide Post Height 7 Ft. 7 Ft. 7 Ft. 7 Ft. 10 Ft. 10 Ft. 10 Ft. 10 Ft. 10 Ft. 10 Ft.
Bunks 2" x 8" x 12' 2" x 8" x 12' 2" x 8" x 12' 2" x 8" x 12' 3" x 10" x 14' 3" x 10" x 16' 3" x 10" x 16' Keel Beam with Custom Keel Beam with Custom Keel Beam with Custom
Piling Mount Brackets T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
T-Type, SS,
Adjustable
Bottom Beam Size (2x) 6" x 4" I-Beam X
120" LG.
6" x 4" I-Beam X
144" LG.
8" x 5" I-Beam X
150" LG.
8" x 5" I-Beam X
150" LG.
10" x 6" I-Beam X
168" LG.
12" x 7" I-Beam X
192" LG.
12" x 7" I-Beam X
192" LG.
12" x 7" I-Beam X
216" LG.
12" x 7" I-Beam X
216" LG.
12" x 7" I-Beam X
240" LG.